Do you have room that could use a ceiling fan Setting up a ceiling fan by yourself is relatively easy, if you are basically replacing a light fixture that is already in the appropriate location. All of the wiring will already be there, hence the only challenge will be replacing the existing workbox with one that is accepted for the weight of a ceiling fan. Hanging your all new ceiling fan on an existing box that won't support the additional weight of the fan could end up in disaster. Before you get started with your project, read the instructions for the fan you have purchased, and make certain that you have all of the needed tools.

When you are setting up the fan on a cathedral ceiling, you may want to acquire additional parts for extending the fan down lower. Once you are prepared for the real installation, make sure that the breaker is switched off, so no power is going to the light you are replacing. After taking off the current light fixture, verify to see if the installed workbox can tackle the weight of your ceiling fan. Most workboxes are not designed for ceiling fans, you will need additional support woodworking plans. This could be done rather easily if you have access to the attic, and are capable to get to the location of the new fan.

To extra support, you nail a 2x4 inside the ceiling rafters where it touches the top of the workbox. Once the 2x4 is well anchored, screw the workbox to the 2x4. If you do it correctly, the fan should be properly supported by the 2x4. If you dont get entry to the attic, you will ought to place a cross bracing in your ceiling. Doing this is more of a challenge and may not be as reliable as using a 2x4 but it is the greatest you can do if you dont possess access to the attic.

After you have put together the fan properly, you are now ready to hang your fan. The tough part is joining the wiring while holding the fan. Depending on the fan, most come with a hanging frame, and others include a bracket with a J hook that lets you dangle the motor housing. Majority of fans require a chain to control the speed of the fan when the wall switch turns the device on or off. If you want a light kit along with your fan, they can be monitored by either chain or wall switch.

Electrical wiring the fan is simply by connecting two black wires, two ground wires and two white wires. And once you have completed the wiring, all you need to do now is attach the blades. Once that is completed, turn the breaker back on to see the results.